Non-Contact Voltage Tester
Fluke 2AC
Always on for faster, safer voltage testing
The Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly. *
Your first-choice tool for go/no-go testing
The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house.
- CAT IV 1000 V overvoltage rated product for best in class user protection
- Suitable for a wide range of residential, commercial and industrial needs
- Fluke ruggedness and reliability with a two-year warranty
|
Operating Principles |
Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage. |
|
Safety Compliance |
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2 |
|
EMC Compliance |
Meets IEC 61326-1:2006 |
|
Operating |
90 V AC to 1000 V AC, CAT IV 1000 V rated |
|
Temperature (Operating and Storage) |
-10°C to 50°C (-14°F to 122°F) |
|
Operating Humidity Ranges |
0% to 95% (0°C to 30°C) |
|
0% to 75% (30°C to 40°C) |
|
|
0% to 45% (40°C to 55°C) |
|
|
Altitude |
2000 m (CAT IV 1000 V) |
|
Cleaning |
Clean with damp cloth |
|
Battery Life |
Typical battery life of greater than one year |
|
Warranty Period |
Two years |
