Temperature Cycle Chamber (air to air)
WINTECH
New line-up is introduced for power device reliability test with +300°C specification.
New WINTECH series
Stable temperature recovery performance by cold and hot air damper switching system
ETAC’s unique hot and cold air switching system by dampers consists of an independent high temperature room, a low temperature room and a test room (where specimen is placed). Hot and cold air are prepared in high temperature room and low temperature room respectively before either hot air or cold air flows in test room alternately, exposing the specimen in the test room to sudden temperature change. Because the test room does not move and only the ambient temperature around specimen changes rapidly. No other extra stress such as vibration is added to the specimen.
In addition, because the current conduction cables can be easily connected to the specimen, this design is optimum for test which requires accurate measurement such as joint reliability evaluation.
+300°C specification
+300°C specification is recently launched for reliability test of power device from automotive parts to industrial equipment with high voltage and high current.
For the launch, basic components were renewed due to renew heat-resistant.
Both high performance and excellent safety are adopted.
|
|
|||||
|
Temperature range |
370×330×400 |
370×500×400 |
370×450×400 |
650×500×400 |
700×500×600 |
|
(High temp.) +60°C ~ +200°C |
NT550A |
NT1050A |
− |
NT1250A |
− |
|
(High temp.) ＋60°C〜＋200°C |
− |
NT1050W |
− |
NT1250W |
NT2050W |
|
(High temp.) +80°C ~ +300°C |
− |
− |
NT3701A |
− |
− |
|
(High temp.) +80°C ~ +300°C |
− |
− |
NT3701W |
− |
− |
Relate product
